Showing 121–132 of 223 results
* Presses in the inner cam bearing* Designed to press from letter side of the inner cam bearing by putting all the pushing pressure to the very outer wall of bearing shell* Eliminates any damage to the bearing, cam and cases* Stops at the case and sets the bearing depth to .023in. to .028in. below…
The Milwaukee-Eight® engine design incorporates balancers to reduce engine vibration. This tool can remove the balancer bearings in both Touring and Softail® models without damage to the crankcase.
Features & Benefits:-* All Milwaukee-Eight engines (Softail and Touring) incorporate balancers to reduce vibration. * JIMS has now developed a balancer bearing installer, which can be used in conjunction with the existing JIMS balancer bearing remover, to precisely install these bearings in the proper location for all Milwaukee-Eight® engines. * Incorrect installation of these bearings…
Removing or installing the high output alternator rotor on the M8™ requires a unique tool, and trust us – those magnets donÂ’t budge easily! At JIMS we understand that using pry bars or striking with a hammer can not only damage the rotor housing, but the magnets as well. This tool easily removes the rotor…
This tool holds the two halves of the spring-loaded scissor balancer gear in alignment before removal for easy installation. No more fumbling with screwdrivers while trying to align the gear in place. This screw is brightly colored to remind the technician to remove it before sealing the engine case.
Features & Benefits:-* Aligns Oil Hole from Crank Case to Tappet Block on Late Shovel & Evo Engines.* Aligns the Oil Pump to the Cam Plate on Twin Cam Engines.* Aligns Lower Rocker Cover to Cylinder Head on Evo Style Heads, including Sportster & Buell (2 Required). * 1/4in.-20 thread.Proudly Made in the USA by…
Features & Benefits:-* Suggested additional purchase, Timken Bearing # SS31-4013Tech Tips:-* May cause a slight increase in engine noise
Features & Benefits:-* Sold as a Pack (4)* Replaces OEM # 18570-38Made in the U.S.A.
* Made from 52100 bearing material* Includes 4340 chromoly axle* Made in the U.S.A.Tech Tips:-* Sold Each, typically 4 Required per Bike.* Caution: This axle must be crimped at 6000 psi minimum, with a radius crimping anvil.
* This tool allows the tappets and anti-rotation pins to be safely and accurately stored for proper reinstallation.* Tappet locations are clearly referenced on the tool which also serves to protect the tappets from damage when removed from the engine.
No products in the cart.
